Another new sound system

[Outside_Lookin_in]

I was listening for a while to the enhancement described above, and suddenly realised that the only way to properly describe the improvement is to say that it sounds like my speaker cones have doubled in size. Absolutely mind-blowing!

 

[Outside_Lookin_in]

This afternoon I applied BCE to the speaker banana plugs, inside and out. I also applied some to the power plug pins on the chassis end. When I started listening I was initially overwhelmed by the HUGE increase of high frequencies being allowed through. Soon my brain assimilated the new sound, and I was hearing detail I'd never heard before in EVERY song. Imaging was far more accurate, larger and more fluid. One song in my evaluation playlist starts with a motorbike moving off: before it just sounded like a motorbike; now I could see it moving away. Additionally, the listening sweet spot has expanded to occupy 2/3 of the room, and timbral accuracy has improved. Perfection just keeps getting better!

 

[bosshoss]

BCE is completely insane.
But it can be very messy if it gets out of hand. Or should I say, out of jar.

 

[Outside_Lookin_in]

Serious question. Is there such a thing as a female audiophile, or is that an oxymoron?

 

[bosshoss]

A message to everyone receiving the Tzar Pack. There are 3 liquid potions included with different colored lids :

Black Lid - (contact enhancer) - use on any AC, analog, ethernet or digital connector pins. Also on any spare AC pins/sockets anywhere in the house.

Gold Lid - paint over existing STB Nuclear or Platinum sheets, also on cable lengths and equipment chassis. Gray color paint.

Silver Lid - same as Gold Lid, but it dries almost clear so can be used on any connector exterior (not the pins), wall outlets, breaker box switches or any other cosmetically sensitive places.

The Gold and Silver Lid potions are paints, not contact enhancers and should never be used on the actual connecting pins.

 

[bosshoss]

Mr. Morloch please check your private messages re my request for your mailing address.

 

[bosshoss]

HYPE+ is NOT just HYPE. It's very real.

 

[Ned]

Serious question. Is there such a thing as a female audiophile, or is that an oxymoron?

Yes, I have met a few in selling high end audio gear - but they are few & far between indeed.

Ned

 

[captain bronstain]

HYPE+ is NOT just HYPE. It's very real.

HYPEdermic needles included?

 

[bosshoss]

HYPEdermic needles included?

Just the syringe, no needle. It hasn't been tested on humans. But what it does for a stereo is beyond description. HYPE is the only suitable word to describe it because no-one will believe it unless and until they hear it. Every time I play the HYPE'd system, I melt into a state of ecstacy.

 

[bosshoss]

I should not have given the impression that "All You Need is HYPE". If I removed all my other treatments, the HYPE alone I have currently applied would not be enough to induce ecstacy. But it IS the major component. And if I replaced all the other components with more HYPE, I'm sure the sound quality would be far superior to what it currently is.

The point is, you still need a lot of treatment. It's just that HYPE is so very powerful and goes so much further than any other formula. HYPE would be too expensive to make dozens of bricks, for example. It's even too expensive to make paint. It's only economically feasible as a contact enhancer. So, it can't get there by itself, at this stage.

 

[bosshoss]

There is a sticky problem concerning the shipment of HYPE+ internationally and domestically

Because it contains isopropyl alcohol, it can't travel by air. It has to go by surface mail, and it has to have the correct labels, and it can't be shipped even by surface mail in large quantities (one pint maximum which is ok).

I was thinking, if I supplied it in a bottle and the end user added their own isopropyl alcohol by filling the bottle with isopropyl with a suppled syringe and small brush stirrer, it would save a lot of shipping time and trouble. What do you think? This is how Stabilant 22 gets around the problem. They supply a concentrate, and you add the isopropyl alcohol yourself.

The other option is I don't use isopropyl alcohol at all. I just use Stabilant 22 concentrate and glycerine, which would add about $30 to the cost of each small (nail polish size) bottle. That's the problem with using a lot of Stabilant 22 - it's so expensive, and all it really does is provide a perfect consistency for applying the HYPE+ to the pins without it beading into droplets.

I was thinking of offering (possibly for sale to the public) two versions of HYPE+

1 - HYPE+ for Analog and AC connectors - (small quantity in a syringe, thick concentrate, most powerful possible, no alcohol)
2 - HYPE+ for Digital and Ethernet connectors - diluted with Isopropyl alcohol so it can be painted in a very thin layer onto the digital connectors. In a nail polish size bottle, less powerful but 100% safe for digital connectors. But can't be shipped by air.

Maybe I could supply a syringe full of HYPE+ Analog, and an empty bottle. Then the customer could squeeze some of the HYPE+ into the empty bottle, and fill the bottle with their own isopropyl alcohol, and stir. That way they would get the Analog and the Digital versions, and there would be no shipping problems. But is it too complicated?

 

[Rythmn Boy]

Isopropyl alcohol is easy to obtain from the hardware shop (at least in Australia), if you want to make HYPE+ available to be diluted by the user.

 

[Rich Strauss]

Isopropyl alcohol is easy to obtain in the USA also. I am happy to add my own to your mixture. No trouble at all.

 

[Outside_Lookin_in]

Isopropyl alcohol is easy to obtain from the hardware shop (at least in Australia), if you want to make HYPE+ available to be diluted by the user.

or any half-decent chemist

 

[bosshoss]

I just placed an order for something new and very promising. In China it is possible to buy boron doped nanodiamond solid slabs. They are quite expensive and very small (3 x 3 x 1 mm). But they are very promising for uses where you can't use liquid nanodiamonds. For example, stuck directly on a phono cartridge or inside a phono preamp in places where liquid would be dangerous. They are not highly doped, but being pure solid lightly doped, they are probably incredibly powerful. I ordered 20 pieces. Cost USD $600. Maybe I just wasted my dough, but if I don't do it, who will?

 

[mr. splendid]

Same here, Isopropyl is easily available , but I'd only need the analog Hype+ anyway . Of course I'd gladly pay for whatever you need to produce the Hype !

 

[bosshoss]

HYPE+ has an extraordinary capacity to keep improving, as time passes. But here's the thing...

To get to a really insane level, you have to keep pushing it. I recommend at least 50 treated connectors (most of them AC). A multiple adapter populated with treated double adapters is perfect. You have to understand that STB works, and have faith in it. When you get into Tzar and especially HYPE, there will be huge changes to the way your system sounds, every day, every hour. Sometimes you'll get worried that things are not right. Because HYPE is extremely sensitive to the electrical supply. But HYPE always wins in the end.

You should never doubt HYPE, and never freak out and remove it. Sometimes you may think it's crazy in the high frequencies, but it isn't. It's just letting you hear how bad your electric supply is at that moment. Even when it's bad, it's beautiful. When the supply improves the HYPE highs will fly. Just keep going. Either do nothing and wait, or add more HYPE.

I have at least 100 treated connectors in the house (counting multiple adapters). So I went outside into the garden, where there are 3 all-weather AC outlets, for the front and back patios. I stuck a HYPE'd double adapter into each of the 3 outdoor AC outlets, wiggled it for a few seconds and removed it. Then I went back inside and played some music, hearing things I never, ever heard before on every track. Next day, it was even better.

It's not just about hearing music. And it's not about expensive hifi gear or perfect hearing. It's experiencing something from another dimension. From the past, but also from the future. One day eveyone on Earth will hear HYPE'd sound, but not for many years, or maybe decades. Meanwhile at G45Central it's the Future/Now.

 

[Outside_Lookin_in]

I first noted the time-travel effect some years ago while we were listening to 45s on the Moon-Kazumi system. I elaborated on it more recently while listening to the Kii Three with prototype STB treatments. I haven't heard the HYPE effect, let alone the HYPE+, so I can only imagine everything is occurring at a higher dimension than the 4th. It probably cures cancer and regenerates cells, but you'll never be allowed to say that.

 

[Outside_Lookin_in]

You're quite right about it not being about expensive hi-fi. I am currently obtaining a level of fidelity from my $800 desktop speakers, which would be impossible to obtain from an untreated system under $160,000.