Another new sound system

bosshoss said:
Daniel, you simply will not believe what Component "B" does, when mixed in a very high concentration. With this high concentration mix, you don't need much mixture, you just need the high concentration and a very light coating. But of course it's going onto STB that's already in place. Still, I know that the hi-B STB is something completely astounding. You just won't believe it. It is so great!!!

If the commercial audio world finds out about this, it will completely change the entire industry.

AND - recorded music is so beautiful, compared with what we currently know. Most of it - obviously there's some recordings that are just beyond help. But only a few that I have come across so far.

It's not all in the mind, but something is happening in the mind. because STB is not constant, it changes, sometimes for the better, sometimes not. But as I use more Hi-B, it gets better and better overall even though it retreats at times. But it always comes back, sometimes stronger than before. And it takes longer to lock in the "reality" of the soundstage, the better it gets. Sometimes it takes me more than a minute to hear the complexity (and beauty) of the soundstage, after sitting down. That never used to happen. It was 5 seconds before. But now, there is just so much there.
Click to expand...

I almost blurted out in my previous post that I was looking forward to sampling the Platinum standard, but thought such outburst might be seen as unbridled and indecorous.
 
I covered as much of my breaker box as I could with the remaining STB Black. It improved things by say 30-40%. Not as much as the original improvement but very noticeable, nonetheless. Next I will wrap the a/c cord ends with the STB tape. I would love to sample the Platinum versions. I am spending more time listening to music and I love it. Thank you so much, Mark. I doubt that there is any amount of money I could have spent on ugraded equipment to get me to this level of audio quality.
 
Rich Strauss said:
I covered as much of my breaker box as I could with the remaining STB Black. It improved things by say 30-40%. Not as much as the original improvement but very noticeable, nonetheless. Next I will wrap the a/c cord ends with the STB tape. I would love to sample the Platinum versions. I am spending more time listening to music and I love it. Thank you so much, Mark. I doubt that there is any amount of money I could have spent on ugraded equipment to get me to this level of audio quality.
Click to expand...

That sounds great Rich. I'm very pleased it's had the desired effect in your system. When you get the more powerful tape you could consider replacing the original piece you applied to the breaker box with a more powerful piece. Or doubling it up. It's obviously in a position which has a major effect. Probably all the mains wires are passing underneath it or something. I'm also developing STB P5F, which is specially made to wrap around the glass of internal equipment fuses. Should be great, and I'll include some in the P5 package
 
bosshoss said:
It's obviously in a position which has a major effect. Probably all the mains wires are passing underneath it or something.
Click to expand...

You will get the best effect by removing the panel and treating the wiring behind it. However, this may not be legal in your county, etc unless you're a qualified electrician, and I wouldn't recommend unless you have a basic understanding of electrical circuits, and electrical safety.
 
bosshoss said:
Oops - I had put it in the wrong folder by mistake.
http://www.g45central.com/posts/Hysterics_EverythingsThere_STB.flac

Please wait...I can't work out why it's not working ...:(
Click to expand...

Thanks Mark! It seems to be working now. As always, your endeavors are much appreciated.

Hopefully, I’ll have my own STB report in a few days. I received the sample pack, but I’ve been so busy with work and other projects (I know, I know, what could be more important than experiencing the euphoria of STB!) I just haven’t had the time to apply any to my breaker box yet.
 
What I would consider doing, and may even do - I may decide to ask my electrician to come out and supervise. He could remove the panel and I could look inside and see if there are areas which could be safely treated. Then he could advise on the legal aspects and do the job if everything is ok.
 
bosshoss said:
What I would consider doing, and may even do - I may decide to ask my electrician to come out and supervise. He could remove the panel and I could look inside and see if there are areas which could be safely treated. Then he could advise on the legal aspects and do the job if everything is ok.
Click to expand...

Make sure you perfect the formula first: you don't want to have to upgrade it 6 months later!
 
bosshoss said:
That sounds great Rich. I'm very pleased it's had the desired effect in your system. When you get the more powerful tape you could consider replacing the original piece you applied to the breaker box with a more powerful piece. Or doubling it up. It's obviously in a position which has a major effect. Probably all the mains wires are passing underneath it or something. I'm also developing STB P5F, which is specially made to wrap around the glass of internal equipment fuses. Should be great, and I'll include some in the P5 package
Click to expand...

Thank you so much, Mark.

Yes, the main feed from the power company is passing through the breaker box. As well as the current for every electrical outlet and light switch in the house. So, it generates tons of EMI. It is the perfect place to start with STB treatment.

The speakers in my main system are Vandersteen 3A Signature Speakers. They are full range floor standing speakers which cost 5K. Once the EMI is mitigated by the STB, the whole audio spectrum can be transmitted by the speakers. Of course, every audio sytsem in the house has been hughely improved. Some of the speakers are restricted range, so don't get the full benefit of the treatment.
 
Vandersteen are wonderful speakers. I used to own a pair about 25 years ago or more. They were curved and looked a bit like Quad electrostatics but they were dynamic. Inside they were all hard-wired, every single connection. They sounded excellent, but I wanted something bigger so i moved on. I miss them. They could really play loud for their size, and they seemed to enjoy it!

I'm sure yours sound incredible Rich. They have the potential to go all the way with STB.
 
The fuses in this photo I took today are modified with the new STB P5F. I haven't tested any yet becuse the Kii fuses seem to be internal, but there's no need. I know what they will do, and I know what the expensive fuses do because I've tried them.
Fuses without the "B" component are selling for $300-$500 each these days. They call them red fuses, purple, green, yellow orange, blue etc. each one more expensive than the last.

These fuses shown below cost me 50c each total. They are just Littelfuses from the hardware store. Then they have self-adhesive P5F wrapped around. With the new sample packs I will send enough P5F to make $5,000 worth of fuses, a lifetime supply. They will be much better than any fancy fuse you can buy. Just buy cheap fuses and wrap the P5F yourself.

I only wrapped one layer so that the P5F won't get in the way of the fuse holder. But if the fuse holder is not tight around the middle, you could wrap the P5F around 2 or 3 times for an even better result.

For a Littelfuse, the best size to cut is 16mm x 6mm. It has wax paper backing and it's a bit difficult to remove because the pieces are so tiny. But if you use a sharp blade you should be able to do it. I did, and my eyesight is not too good.

P5E is not suitable for the job, best to use the P5F. Don't underestimate how potentially great this will be, if you do this to every fuse in the system. The fuse is the weakest link in the equipment, but after this it will be the strongest.

fuzez.jpg
 
Rich Strauss said:
I covered as much of my breaker box as I could with the remaining STB Black. It improved things by say 30-40%. Not as much as the original improvement but very noticeable, nonetheless. Next I will wrap the a/c cord ends with the STB tape. I would love to sample the Platinum versions. I am spending more time listening to music and I love it. Thank you so much, Mark. I doubt that there is any amount of money I could have spent on ugraded equipment to get me to this level of audio quality.
Click to expand...

I've always had the most profound improvements from treating the inside of the powerpoint. It's a bit of a hassle but well worth it. Just kill the relevant breaker circuit first and test it's off by plugging something in before you start. Cover 4-6 inches of the internal wiring, and as much of the backing plate as you can without interfering with the seating. Do not allow the SBT tape to touch any bare wire or metal fixtures. After that you can cover the as much of the outside of the power point as you can without interfering with its operation. Doing both the inside and outside gives stunning sonic improvements.
 
Outside_Lookin_in said:
Doing both the inside and outside gives stunning sonic improvements.
Click to expand...

That is true. I did that with the downstairs system years ago, but not with STB. I haven't done anything to the inside of the wall sockets used for the Kii system, because the furniture is in the way and too heavy to lift unless I empty everything out. I'll do that sometime soon.

I just got a call from AMF Magnetics about the 100 metre roll. They can't deliver it to the PO box because it's too heavy. So it's coming here to the house. I hope I'm not asleep when it arrives.
 
They look great. Now all these companies like B&W, JBL etc.are going to have to start paying royalties for tankers full of hi-B STB serum. If I'm like this already, what will I be like when I'm ruling the world?
 
You must log in or register to reply here.

Similar threads

captainsalty
Bob Bennett has passed away
Replies
5
Views
256
Rythmn Boy
Rythmn Boy
Al.Burnett1966
Associated Recording Studios Acetates to identify (UK?)
Replies
6
Views
201
Al.Burnett1966
Al.Burnett1966
Rythmn Boy
The Thunderbirds (Singapore)
Replies
6
Views
230
The Raven
The Raven
Al.Burnett1966
The Great Wall 4-song acetate
Replies
10
Views
405
The Raven
The Raven
Al.Burnett1966
The Henchmen - Stone, Stone (wild acetate!)
Replies
3
Views
260
chuckd
chuckd